F06B, 72 bottles, Bordeaux Bin

kr 1 590

Used to stack boxes of single Champagne bottles or Bordeaux/Burgundy bottles that you have more than 6 of. Connects with F02A and F02B-shelves. Capacity of 72 Bordeaux bottles.

SKU: 1162 Categories:

Description

Color: Redwood (wood)
Dimensions: W 40.7 cm | D 23 cm | H 122 cm
Capacity 72 bottles

Suitable for Bordeaux bottles. Holds a total of 24 bottles in each compartment. F06B is best placed at the bottom as it is the largest with F06A on the top, which is the same width but 813 mm high. Total height is 2058.5 mm including plinth (26mm). If you want the system to be taller, you can put two F01Bs on top of each other (H2465 mm).

 

The shelf is easily assembled with a nail gun and then fixed to the wall and a plinth (F16C) that can be purchased separately (2 in the package). Base is built 2.6 cm with a fine profiled strip at the front edge. Nail gun (staple 21 mm) can be rented at several locations. Note that it is an advantage to insert the staple where it is least visible from the side you are looking at the shelves. And that you regulate the pressure on the gun so that the staple is not driven too far into the wood. Assembly instructions are included for each module.
Note that it is important to use the supplied distance regulator for correct distances from the wall (6-7 cm) and for the bottles to lie safely in the rack.

Supplied flat-packed.
Estimated installation time is about 20 minutes.
Screws are included, but we recommend buying your own screws for installation in the type of wall you have.

 

Goes well with F06A.

Additional information

Weight
    3 kg
  • Description

    Description

    Color: Redwood (wood)
    Dimensions: W 40.7 cm | D 23 cm | H 122 cm
    Capacity 72 bottles

    Suitable for Bordeaux bottles. Holds a total of 24 bottles in each compartment. F06B is best placed at the bottom as it is the largest with F06A on the top, which is the same width but 813 mm high. Total height is 2058.5 mm including plinth (26mm). If you want the system to be taller, you can put two F01Bs on top of each other (H2465 mm).

     

    The shelf is easily assembled with a nail gun and then fixed to the wall and a plinth (F16C) that can be purchased separately (2 in the package). Base is built 2.6 cm with a fine profiled strip at the front edge. Nail gun (staple 21 mm) can be rented at several locations. Note that it is an advantage to insert the staple where it is least visible from the side you are looking at the shelves. And that you regulate the pressure on the gun so that the staple is not driven too far into the wood. Assembly instructions are included for each module.
    Note that it is important to use the supplied distance regulator for correct distances from the wall (6-7 cm) and for the bottles to lie safely in the rack.

    Supplied flat-packed.
    Estimated installation time is about 20 minutes.
    Screws are included, but we recommend buying your own screws for installation in the type of wall you have.

     

    Goes well with F06A.

  • Additional information

    Additional information

    Weight
      3 kg