F12C, 8 bottles, Display Top

kr 1 075

Display shelf where the bottles are placed at approx. 45 degrees with the bottom down and the spout up.

SKU: 1275 Categories:

Description

Color: Redwood (wood)
Dimensions: W 81.3 cm D 23 cm H 12.7 cm
Capacity 8 bottles

 

As a combination, preferably in the center of a wall and preferably on top of a F01B Note that you cannot install shelving above the display shelf unless you install solid supports (must be made). But it can be great to use the wall above for e.g. a wine poster or wine list.

F12C can be installed together with a F01B where the display is placed on top. The F12C shelves are adapted to the width of an F01 shelf. Note that it is important to use the supplied distance regulator for correct distances from the wall (6-7 cm) and for the bottles to lie safely in the shelf.

The shelves come flat-packed and can be easily assembled using a nail gun (21 mm staple). These can be rented in several places. Note that it is an advantage to insert the staple where it is least visible from the side you are looking at the shelves. And that you regulate the pressure on the gun so that the pin is not driven too far into the wood. Assembly instructions are included for each module.

 

Supplied flat-packed and takes approx. 10 minutes to install.

Screws are included, but we recommend buying your own screws for installation in the type of wall you have.

Additional information

Weight
    2 kg
  • Description

    Description

    Color: Redwood (wood)
    Dimensions: W 81.3 cm D 23 cm H 12.7 cm
    Capacity 8 bottles

     

    As a combination, preferably in the center of a wall and preferably on top of a F01B Note that you cannot install shelving above the display shelf unless you install solid supports (must be made). But it can be great to use the wall above for e.g. a wine poster or wine list.

    F12C can be installed together with a F01B where the display is placed on top. The F12C shelves are adapted to the width of an F01 shelf. Note that it is important to use the supplied distance regulator for correct distances from the wall (6-7 cm) and for the bottles to lie safely in the shelf.

    The shelves come flat-packed and can be easily assembled using a nail gun (21 mm staple). These can be rented in several places. Note that it is an advantage to insert the staple where it is least visible from the side you are looking at the shelves. And that you regulate the pressure on the gun so that the pin is not driven too far into the wood. Assembly instructions are included for each module.

     

    Supplied flat-packed and takes approx. 10 minutes to install.

    Screws are included, but we recommend buying your own screws for installation in the type of wall you have.

  • Additional information

    Additional information

    Weight
      2 kg

You might also like