WineMaster IN25X - 25m3

kr 59 808

Mounted on the wall, with insulated pipes for air intake/output. For rooms up to 25 m³.

Description

Winemaster WINEIN25X works very well where C25 machines cannot be used. For example, where there is no neighboring room that can take off the hot air (hot side) and this must be led away via pipes to, for example, the outside. WINEIN25X is mounted with the entire machine on the wall inside the wine room on 2 supplied brackets and there are only 2 insulated pipes that need to be connected and led to a place where one pipe collects air and one pipe delivers air. Perfect where there are long distances to draw/deliver air. Cooling pipes and couplings must be ordered separately.

 

Dimensions: H.540 x W.540 x D.630 mm
Capacity: Up to 25 m3
Weight: 35 kg
Noise level: 43 db
Cooling capacity: 500w at 15°C
Power supply: 230-240 V - 50Hz

 

The features and benefits of the WINEIN25X device include:

- Reduced energy costs with an energy-saving motorized fan that requires only 7 watts for the fan to operate at full speed

- 2 adjustable speeds controlled by the thermostat

- Over 90 % electrical efficiency with a brushless motor

- Quiet operation with rubber shock absorbers to reduce vibration noise

- Excellent airflow of 198m3 measured inside a basement

- Used organic refrigerant gas that does not contain CFCs

- Electronic thermostat with large and prominent digital display for easy reading

- Simple maintenance with dust filter change recommended once a year

- Optional installation kit available to save on installation time and for optimal insulation

Specific accessories included with WINEIN25X for installation purposes include a complete duct kit that secures air entry and exit:

- 2 pipes that are 125 mm in diameter and 2 meters long

- 2 support collars - 125 mm diameter

- 2 bends 90 degrees with sleeves - 125 mm diameter

- 2 telescopic wall crossings of TMK 125/150 with shutter for sluice valves

 

Additional accessories can be purchased separately if needed for your particular installation, including more pipe, 90 or 45 degree elbow with sleeve and clamps.

 

Gas - R449A

 

The fuse required for the plug is 3 Amp

 

Download the brochure:

IN25X

Additional information

Weight
    37 kg
Dimensions
    120 × 80 × 115 cm
  • Description

    Description

    Winemaster WINEIN25X works very well where C25 machines cannot be used. For example, where there is no neighboring room that can take off the hot air (hot side) and this must be led away via pipes to, for example, the outside. WINEIN25X is mounted with the entire machine on the wall inside the wine room on 2 supplied brackets and there are only 2 insulated pipes that need to be connected and led to a place where one pipe collects air and one pipe delivers air. Perfect where there are long distances to draw/deliver air. Cooling pipes and couplings must be ordered separately.

     

    Dimensions: H.540 x W.540 x D.630 mm
    Capacity: Up to 25 m3
    Weight: 35 kg
    Noise level: 43 db
    Cooling capacity: 500w at 15°C
    Power supply: 230-240 V - 50Hz

     

    The features and benefits of the WINEIN25X device include:

    - Reduced energy costs with an energy-saving motorized fan that requires only 7 watts for the fan to operate at full speed

    - 2 adjustable speeds controlled by the thermostat

    - Over 90 % electrical efficiency with a brushless motor

    - Quiet operation with rubber shock absorbers to reduce vibration noise

    - Excellent airflow of 198m3 measured inside a basement

    - Used organic refrigerant gas that does not contain CFCs

    - Electronic thermostat with large and prominent digital display for easy reading

    - Simple maintenance with dust filter change recommended once a year

    - Optional installation kit available to save on installation time and for optimal insulation

    Specific accessories included with WINEIN25X for installation purposes include a complete duct kit that secures air entry and exit:

    - 2 pipes that are 125 mm in diameter and 2 meters long

    - 2 support collars - 125 mm diameter

    - 2 bends 90 degrees with sleeves - 125 mm diameter

    - 2 telescopic wall crossings of TMK 125/150 with shutter for sluice valves

     

    Additional accessories can be purchased separately if needed for your particular installation, including more pipe, 90 or 45 degree elbow with sleeve and clamps.

     

    Gas - R449A

     

    The fuse required for the plug is 3 Amp

     

    Download the brochure:

    IN25X

  • Additional information

    Additional information

    Weight
      37 kg
    Dimensions
      120 × 80 × 115 cm