WineMaster IN25X - 25m3
kr 59 808
Mounted on the wall, with insulated pipes for air intake/output. For rooms up to 25 m³.
Description
Winemaster WINEIN25X works very well where C25 machines cannot be used. For example, where there is no neighboring room that can take off the hot air (hot side) and this must be led away via pipes to, for example, the outside. WINEIN25X is mounted with the entire machine on the wall inside the wine room on 2 supplied brackets and there are only 2 insulated pipes that need to be connected and led to a place where one pipe collects air and one pipe delivers air. Perfect where there are long distances to draw/deliver air. Cooling pipes and couplings must be ordered separately.
Dimensions: H.540 x W.540 x D.630 mm
Capacity: Up to 25 m3
Weight: 35 kg
Noise level: 43 db
Cooling capacity: 500w at 15°C
Power supply: 230-240 V - 50Hz
The features and benefits of the WINEIN25X device include:
- Reduced energy costs with an energy-saving motorized fan that requires only 7 watts for the fan to operate at full speed
- 2 adjustable speeds controlled by the thermostat
- Over 90 % electrical efficiency with a brushless motor
- Quiet operation with rubber shock absorbers to reduce vibration noise
- Excellent airflow of 198m3 measured inside a basement
- Used organic refrigerant gas that does not contain CFCs
- Electronic thermostat with large and prominent digital display for easy reading
- Simple maintenance with dust filter change recommended once a year
- Optional installation kit available to save on installation time and for optimal insulation
Specific accessories included with WINEIN25X for installation purposes include a complete duct kit that secures air entry and exit:
- 2 pipes that are 125 mm in diameter and 2 meters long
- 2 support collars - 125 mm diameter
- 2 bends 90 degrees with sleeves - 125 mm diameter
- 2 telescopic wall crossings of TMK 125/150 with shutter for sluice valves
Additional accessories can be purchased separately if needed for your particular installation, including more pipe, 90 or 45 degree elbow with sleeve and clamps.
Gas - R449A
The fuse required for the plug is 3 Amp
Download the brochure:
Additional information
Weight |
|
---|---|
Dimensions |
|
-
Description
Description
Winemaster WINEIN25X works very well where C25 machines cannot be used. For example, where there is no neighboring room that can take off the hot air (hot side) and this must be led away via pipes to, for example, the outside. WINEIN25X is mounted with the entire machine on the wall inside the wine room on 2 supplied brackets and there are only 2 insulated pipes that need to be connected and led to a place where one pipe collects air and one pipe delivers air. Perfect where there are long distances to draw/deliver air. Cooling pipes and couplings must be ordered separately.
Dimensions: H.540 x W.540 x D.630 mm
Capacity: Up to 25 m3
Weight: 35 kg
Noise level: 43 db
Cooling capacity: 500w at 15°C
Power supply: 230-240 V - 50HzThe features and benefits of the WINEIN25X device include:
- Reduced energy costs with an energy-saving motorized fan that requires only 7 watts for the fan to operate at full speed
- 2 adjustable speeds controlled by the thermostat
- Over 90 % electrical efficiency with a brushless motor
- Quiet operation with rubber shock absorbers to reduce vibration noise
- Excellent airflow of 198m3 measured inside a basement
- Used organic refrigerant gas that does not contain CFCs
- Electronic thermostat with large and prominent digital display for easy reading
- Simple maintenance with dust filter change recommended once a year
- Optional installation kit available to save on installation time and for optimal insulation
Specific accessories included with WINEIN25X for installation purposes include a complete duct kit that secures air entry and exit:
- 2 pipes that are 125 mm in diameter and 2 meters long
- 2 support collars - 125 mm diameter
- 2 bends 90 degrees with sleeves - 125 mm diameter
- 2 telescopic wall crossings of TMK 125/150 with shutter for sluice valves
Additional accessories can be purchased separately if needed for your particular installation, including more pipe, 90 or 45 degree elbow with sleeve and clamps.
Gas - R449A
The fuse required for the plug is 3 Amp
Download the brochure:
-
Additional information
Additional information
Weight - 37 kg
Dimensions - 120 × 80 × 115 cm